Type
|
Semi-automatic, single-beam filter photometer
|
Light Source
|
Halogen lamp - 12 V, 20 W with protection for lifetime
|
Wavelength |
340 nm - 800 nm |
Wavelength Selection
|
Automatic via 9-position filter wheel :
6 standard interference filters: 340 nm, 405 nm, 492 nm, 546 nm, 578 nm and 623 nm;
3 positions for optional filter of choice
|
Photometric Range
|
0 - 2.5 A
|
Cuvette System
|
Micro flow cell: 32 µl, 10 mm light path interchangeable with normal standard cuvettes (macro or semi-micro, disposable or special optical glass)
|
Temperature Control
|
- Internal Peltier element, temperature variable, pre-adjusted to 25 °C, 30 °C and 37 °C
- Equilibration time for aspirated reaction mixture to reach 37 °C from ambient temperature: 15 sec
|
Aspiration System
|
Built-in peristaltic pump driven by stepper motor, programmable aspiration volume controlled by infrared light barrier
|
Sipping Volume |
- Minimum 250 µl, typically 500 µl up to 2000 µl
- Separate setting of aspirate volume and wash volume
|
Operator Interface |
Touchscreen for direct functions and alphanumerical inputs
|
Data Presentation |
Graphic display: white characters or symbols, blue backlight, dimension 240 * 128 dots
|
Integrated Printer
|
Dot-matrix printer, 24 characters per line
|
Languages
|
English and French / German / Indonesian / Russian / Spanish
|
Memory
|
- General operating software can be updated by PC
- Reagent open system with capacity for up to 231 programmable methods
- Import of data by touchscreen or PC
- Up to 50 non-linear calibration curves with max 20 sets of points can be stored
|
Data Logging
|
Up to 1000 results can be saved in the memory
|
Signal Port
|
Serial port for connection to an external printer and/or PC
|
Measurement Procedures
|
- Absorbance
- End Point with factor, standard or multiple standards, with or without reagent blank and/or sample blank
- Bichromatic end point
- Kinetics with standard, factor or multiple standards, with or without blank
- Fixed time with standard, factor or multiple standards, with or without reagent blank
- Turbidimetry
- Single, double and triple determinations
- Curve fitting for non-linear standard curves
- Free hemoglobin in combination with optional interference filters
|
Quality control
|
Up to 50 methods can be controlled with two control sera
Levey Jennings plot
|
Measuring Time
|
- Kinetic: variable from 3 - 25 deltas, time per delta 4 - 255 sec in 1 sec steps
- Fixed time: variable from 0 - 65535 sec in 1 sec steps
|
Delay Time
|
Programmable from 0 - 65535 sec in 1 sec steps
|
Mains Supply
|
Range: 100 VAC up to 264 VAC at 50/60 Hz
|
Dimensions
|
Length 33 cm x width 34 cm x height 18 cm
|
Weight
|
5,3 kg
|
That's us
